Find Missing VBA Project References Code

[larrycav]

Workbook developed in Excel 11. Has worked great everywhere, literally globally, until I ran into Win8 with Office 2013.

What I need is code that will display in a message box, the library references that are missing when the workbook is opened on the W8 Off2013 box.

I have code from a solution I found on this board that did not work. I would live to link to that but the system WILL NOT LET ME.

The solution was a workbook [book1] that you ran on your system, then sent to the user with the higher version of office. They were to open it, save it and send it back. It was supposed to list the library reference differences. It locked up Excel 2013 instead.... arrrgh... and it looks so promising.

I could modify the code below to tell me there is a reference problem but it won't identify what libraries are causing it. Could someone help me modify this code to actually list the missing references or perhaps make the code work as it was designed to but work on Win8 with Off2013?


Sub References_RemoveMissing()
'Macro purpose: To remove missing references from the VBE

Dim theRef As Variant, i As Long

On Error Resume Next

For i = ThisWorkbook.VBProject.References.Count To 1 Step -1
Set theRef = ThisWorkbook.VBProject.References.Item(i)
If theRef.isbroken = True Then
'ThisWorkbook.VBProject.References.Remove theRef
End If
Next i

If Err <> 0 Then
MsgBox "A missing reference has been encountered!" _
& "You will need to email this workbook to "". In the subject line enter Broken Refs", _
vbCritical, "Unable To Remove Missing Reference"
End If

On Error GoTo 0
End Sub

Incidentally, it did not pop up a message box...it just froze the workbook.

[SamT]

I'm not familiar with Office 13, and, my office computer is down, but...


Sub References_RecordMissing()
'''''''''''''''''Macro purpose: To remove missing references from the VBE
'Macro purpose: To Record missing references in the Project

Dim theRef As Variant, i As Long, j As long
Dim WkSht As Worksheet
Dim MyFlag As Boolean 'Personal preference. Clearing all Errors as soon as possible.

'YOU insert WkSht into workbook as New Worksheet here.

On Error Resume Next

For i = ThisWorkbook.VBProject.References.Count To 1 Step -1
Set theRef = ThisWorkbook.VBProject.References.Item(i)
If theRef.isbroken = True Then
MyFlag = True
j = j + 1
WkSht.Range("A" & CStr(j)) = TheRef.Name
'ThisWorkbook.VBProject.References.Remove theRef
End If
Err = 0
Next i

'If Err <> 0 Then
If MyFlag Then
Me.Save
MsgBox "A missing reference has been encountered!" _
& "You will need to email this workbook to "". In the subject line enter Broken Refs", _
vbCritical, "Unable To Remove Missing Reference"
End If

On Error Goto 0
End Sub

[larrycav]

Thank You!

So I'm clear on this process. I need to insert a new worksheet into the workbook. Do I need to name that worksheet something specific? I ask because I don't see a pointer to dump output to a specific worksheet and the workbook contains about 10 worksheets now.

[snb]

I'd suggest to make an inventory of all the necessary references before sending the workbook, storing those reference data in the workbook.
On opening the workbook by the receiving party, the references on that system can be compared to the stored ones.
If any reference is lackig the user can be alerted.

[larrycav]

I'd suggest to make an inventory of all the necessary references before sending the workbook, storing those reference data in the workbook.
On opening the workbook by the receiving party, the references on that system can be compared to the stored ones.
If any reference is lackig the user can be alerted.

Yes, that was what the other workbook was supposed to do as well. I set the 5 basic library references that have always worked, then send the workbook to the other user. When they opened it, it was supposed to check the references on their system and list them. I didn't work.

So with regard to this new code.... It looks as if I'm supposed to add a new worksheet to the workbook. The code function will output library differences to that worksheet. But what I don't see in the code is a specific reference to a specific worksheet. So, how does the code know to output to the new worksheet I add to the workbook?

Don't I need to give the worksheet a specific name and address that name in the new code?

Also, do I put that code in the start up routine for the work book or can I just put the code in new module and put a command button on the new worksheet to run the code?

[larrycav]

I inserted a new worksheet in the workbook and named it "libs"

I modified the code as shown:


Sub References_RecordMissing()
'''''''''''''''''Macro purpose: To record missing references from the VBE
'Macro purpose: To Record missing references in the Project

Dim theRef As Variant, i As Long, j As Long
Dim WkSht As Worksheet
Dim MyFlag As Boolean 'Personal preference. Clearing all Errors as soon as possible.

WkSht = ("libs")
'YOU insert WkSht into workbook as New Worksheet here.

On Error Resume Next

For i = ThisWorkbook.VBProject.References.Count To 1 Step -1
Set theRef = ThisWorkbook.VBProject.References.Item(i)
If theRef.isbroken = True Then
MyFlag = True
j = j + 1
WkSht.Range("A" & CStr(j)) = theRef.Name
'ThisWorkbook.VBProject.References.Remove theRef
End If
Err = 0
Next i

'If Err <> 0 Then
If MyFlag Then
Me.Save [this line is highlighted]
MsgBox "A missing reference has been encountered!" _
& "You will need to email this workbook to "". In the subject line enter Broken Refs", _
vbCritical, "Unable To Remove Missing Reference"
End If

On Error GoTo 0
End Sub

When I compile I get [ "Invalid Use of Keyword Me"] error

Since I'm outputting to the new worksheet can I eliminate this section and just end the sub at that point?


Err = 0
Next i

'If Err <> 0 Then
If MyFlag Then
Me.Save [this line is highlighted]
MsgBox "A missing reference has been encountered!" _
& "You will need to email this workbook to "". In the subject line enter Broken Refs", _
vbCritical, "Unable To Remove Missing Reference"

There by ending up with this:


Sub References_RecordMissing()
'''''''''''''''''Macro purpose: To record missing references from the VBE

Dim theRef As Variant, i As Long, j As Long
Dim WkSht As Worksheet
Dim MyFlag As Boolean 'Personal preference. Clearing all Errors as soon as possible.

WkSht = ("libs")
'YOU insert WkSht into workbook as New Worksheet here.

On Error Resume Next

For i = ThisWorkbook.VBProject.References.Count To 1 Step -1
Set theRef = ThisWorkbook.VBProject.References.Item(i)
If theRef.isbroken = True Then
MyFlag = True
j = j + 1
WkSht.Range("A" & CStr(j)) = theRef.Name

End If

End Sub

[larrycav]

Here's what I did. I created a new worksheet [name doesn't matter because I put a command button on the worksheet itself to run the code]. I tested it and it doesn't return any data on my machine [expected] but also doesn't error out either. Will send it off to Finland and post back results. Hopefully it will help someone else down the road.

Here's the code at this point.


Sub References_RecordMissing()
'''''''''''''''''Macro purpose: To record missing references from the VBE
'Macro purpose: To Record missing references in the Project

Dim theRef As Variant, i As Long, j As Long
Dim WkSht As Worksheet
Dim MyFlag As Boolean 'Personal preference. Clearing all Errors as soon as possible.

'WkSht = ("libs")
'YOU insert WkSht into workbook as New Worksheet here.

On Error Resume Next

For i = ThisWorkbook.VBProject.References.Count To 1 Step -1
Set theRef = ThisWorkbook.VBProject.References.Item(i)
If theRef.isbroken = True Then
MyFlag = True
j = j + 1
WkSht.Range("A" & CStr(j)) = theRef.Name
'ThisWorkbook.VBProject.References.Remove theRef
End If
Next

On Error GoTo 0
End Sub

[SamT]

Sub References_RecordMissing()
'Macro purpose: To record missing references from the VBE

Dim theRef As Variant, i As Long, j As Long
Dim WkSht As Worksheet

Set WkSht = Worksheets("libs") 'Here we set a reference to a specific Worksheet

On Error Resume Next

For i = ThisWorkbook.VBProject.References.Count To 1 Step -1
Set theRef = ThisWorkbook.VBProject.References.Item(i)
If theRef.isbroken = True Then ' Question: Does the function isBroken work?
j = j + 1
WkSht.Range("A" & CStr(j)) = theRef.Name
End If
Next

On Error Goto 0
End Sub

[SamT]

Found them.

I think this is the KB Article you used: http://www.vbaexpress.com/kb/getarticle.php?kb_id=272

Did you also see this one, also by Ken Puls? http://www.vbaexpress.com/kb/getarticle.php?kb_id=267

[snb]

Sub M_snb()
On error resume next

For Each rf In ThisWorkbook.VBProject.References
c00 = c00 & vbCr & rf.Name & "_" & rf.Description & "_" & rf.fullpath & "_" & rf.GUID
Next

With Sheets.Add
.Cells(1).Resize(UBound(Split(c00, vbCr))) = Application.Transpose(Split(Mid(c00, 2), vbCr))
.Columns(1).TextToColumns , , , , 0, 0, 0, 0, -1, "_"
.Columns(1).Resize(, 4).AutoFit
End With
End Sub

[SamT]

snb's code adds a sheet on the fly and puts all the used references in it by name, description, path and GUID.