Angles between 2 lines

Hi All,

I am having some issues with figuring angles between 2 lines.
Attachment 20056Attachment 20057
Above are 2 images of where I am trying to find the angle. The first I get 5 degrees, the second one I get 60 degrees. They should be 85 degrees and 120 degrees. I am using this formula:

Code:

---

Slope_A = (iData(iOne).Y - iData(iOne).y1) / (iData(iOne).X - iData(iOne).x1)
        Slope_B = (iData(iOne + 1).Y - iData(iOne + 1).y1) / (iData(iOne + 1).X - iData(iOne + 1).x1)
        Tangent_of_Angle = (Slope_B - Slope_A) / (1 + Slope_A * Slope_B)

---

Here is the iData class:

Code:

---

Public Class TLine
        Public X As Double
        Public Y As Double
        Public x1 As Double
        Public y1 As Double
        Public tLength As Double
        Public Property LineLength() As Double
            Get
                Return SettLength()
            End Get
            Set(ByVal value As Double)
                tLength = value
            End Set
        End Property
        Private Function SettLength()
            If X = x1 Then 'line is straight
                tLength = Math.Abs(Y - y1)
            ElseIf Y = y1 Then 'line is straight
                tLength = Math.Abs(X - x1)
            Else
                tLength = Math.Sqrt(Squared(Math.Abs(X - x1)) + Squared(Math.Abs(Y - y1)))
            End If
            SettLength = tLength
        End Function
    End Class

---

I will post whatever information you need to help.
The data is coming from a drawing that is to scale so the data is correct.

Thanks for looking.
Any help at all is appreciated.

1. Is that VB or VBA? Looks like VB to me

2. Can you attach a workbook that has the X-Y's of the points?

3. If X=x1 then the slope would be infinite

4. If Y=y1, then the slope would be 0

Morning Paul,


It is VB but we have a lot of very smart people here and I figured ya'll could help me out.
I think I have attached an excel workbook. I have in the workbook a picture of what I am trying to draw and the points and the angles I came up with. I am looking for the angle the next line goes on. Please keep in mind that the lines could go anywhere.
I am getting the slope of the lines and derive the tangents from that. I think it is giving be the difference of the 2 lines but it is using the smaller angles.
hmm maaybe I could determine the angle the lines are on and go from there?

Paul,

Yes I do get 0 and infinity, that needs to be taken into account also. These are the 2 number that showed me I was Wrong!> :)

Paul Thank you so much for your help. You made me get out of the box I was in.

I figured it out. I was just looking at the lines, I should have been doing calculations for the angle between 2 vectors.
To get the below code to work correctly you need to make the call for the length of the line to get the NewX and NewY to get populated.
Revised class:

Code:

---

Public Class TLine
        Public X As Double
        Public Y As Double
        Public x1 As Double
        Public y1 As Double
        Public tLength As Double
        Public tAngle As Double
        Public NewX As Double
        Public NewY As Double
        Public Property LineLength() As Double
            Get
                Return SettLength()
            End Get
            Set(ByVal value As Double)
                tLength = value
            End Set
        End Property
        Private Function SettLength() As Double
            If X = x1 Then 'line is straight
                tLength = Math.Abs(Y - y1)
            ElseIf Y = y1 Then 'line is straight
                tLength = Math.Abs(X - x1)
            Else
                tLength = Math.Sqrt(Squared(Math.Abs(X - x1)) + Squared(Math.Abs(Y - y1)))
            End If
            NewX = X - x1
            NewY = Y - y1
            Return tLength
        End Function
        Public Property AnAngle() As Double
            Get
                Return MakeAnAngle()
            End Get
            Set(ByVal value As Double)
                tAngle = value
            End Set
        End Property
        Private Function MakeAnAngle() As Double
            tAngle = Math.Atan((Y - y1) / (X - x1))
            Return tAngle
        End Function
    End Class
Private Function DotProduct(ByRef iData As TLine(), iOne As Integer, iTwo As Integer) As Double
        Dim mTemp As Double
        mTemp = (iData(iOne).NewX * iData(iTwo).NewX) + (iData(iOne).NewY * iData(iTwo).NewY)
        Return mTemp
    End Function
    Private Function GetCos(ByRef iData As TLine(), iOne As Integer, iTwo As Integer) As Double
        Dim mTemp As Double, mWork As Double
        mWork = (iData(iOne).LineLength * iData(iTwo).LineLength)
        mTemp = DotProduct(iData, iOne, iTwo) / mWork
        Return mTemp
    End Function

---

OK Update:
That did not work the way I wanted it to. I was getting an angle but I never knew what angle it was. Sometimes it was the compliment.
I used the documentation here : http://www.teacherschoice.com.au/mat...e_trig_sss.htm

Try this

Code:

---

Option Explicit

'based on
'ref http://www.devx.com/tips/Tip/33124

Const cPI As Double = 3.14159265358979

Function getAngleBetweenLinesVect(commonX As Double, commonY As Double, _
    X1 As Double, Y1 As Double, _
    Y2 As Double, X2 As Double) As Double
   
    Dim aRadians As Double
    Dim diffX1 As Double, diffX2 As Double, diffY1 As Double, diffY2 As Double
   
    'check if both the lines are the same, if they are exit the function
    If (commonY = Y1 And commonX = X1) Or _
        (commonY = Y2 And commonX = X2) Or _
        (Y1 = Y2 And X1 = X2) Then
       
        getAngleBetweenLinesVect = 0#
        Exit Function
    End If
   
    'set the variables
    diffX1 = commonX - X1
    diffY1 = commonY - Y1
    diffX2 = commonX - X2
    diffY2 = commonY - Y2

    'applying the angle between two lines vector rule, calculate the angle in radians
    aRadians = invCos(((diffX1 * diffX2) + (diffY1 * diffY2)) / _
        (Sqr(diffX1 ^ 2 + diffY1 ^ 2) * Sqr(diffX2 ^ 2 + diffY2 ^ 2)))

    'convert to degrees
    getAngleBetweenLinesVect = aRadians * 180# / cPI
End Function

'the inverse cos function. Returns an angle.
Public Function invCos(X As Double) As Double
    If X > 1 Or X < -1 Then
    'if the ratio supplies is outside the acceptable range.
    ElseIf X = 1 Then
        invCos = 0
    ElseIf X = -1 Then
        invCos = cPI
   
    Else
        invCos = (Atn(-X / Sqr(-X * X + 1)) + 2 * Atn(1))
    End If
End Function

---