Convert all jpg and pdf files from folder into 1 single pdf with same width

Cheers everyone,

Does anyone know how to use code to automatically convert all jpg files and pdf files from a specific folder into 1 single pdf file ( with page marginalization - keeping the same width as the first page )

Thanks
God Bless

I have used VBA to combine multiple PDFs to a single PDF. This is a rather common topic. Google "VBA merge PDF". I don't know if 'marginalization' can be programmatically managed. What should happen if some documents are in landscape orientation?

I know nothing about converting JPG to PDF.

you can use ImageMagick?
ImageMagick – Download

Code:

---

Private Sub tt()
Const conType As String = "*.jpg"
Dim col As New Collection
Dim sFile As String, j As Integer
Dim path As String, ext As String
' put the PATH of the jpgs here!
path = Environ$("userprofile") & "\documents\"
sFile = Dir$(path & conType)
Do Until Len(sFile) = 0
    j = j + 1
    col.Add Item:=sFile, Key:=j & ""
    sFile = Dir$
Loop
For j = 1 To col.Count
    Call ConvertJpgToPdfUsingMagick(col(j), Replace$(col(j), ".jpg", ".pdf"))
Next
End Sub


Sub ConvertJpgToPdfUsingMagick(ByVal inputImagePath As String, ByVal outputPdfPath As String)
    'Dim inputImagePath As String
    'Dim outputPdfPath As String
    Dim command As String
   
    ' Set the paths
    'inputImagePath = "C:\Path\To\Input\Image.jpg"
    'outputPdfPath = "C:\Path\To\Output\Output.pdf"
   
    ' Build the command
    command = "C:\Program Files\ImageMagick-7.1.1-Q16-HDRI\magick.exe convert """ & inputImagePath & """ """ & outputPdfPath & """"
   
    ' Execute the command
    Shell command, vbHide
End Sub

---

Quote:

---

Originally Posted by arnelgp

you can use ImageMagick?
ImageMagick – Download

Code:

---

Private Sub tt()
Const conType As String = "*.jpg"
Dim col As New Collection
Dim sFile As String, j As Integer
Dim path As String, ext As String
' put the PATH of the jpgs here!
path = C:\MIHAI\DOC\ASIG\DOSARE
sFile = Dir$(path & conType)
Do Until Len(sFile) = 0
    j = j + 1
    col.Add Item:=sFile, Key:=j & ""
    sFile = Dir$
Loop
For j = 1 To col.Count
    Call ConvertJpgToPdfUsingMagick(col(j), Replace$(col(j), ".jpg", ".pdf"))
Next
End Sub


Sub ConvertJpgToPdfUsingMagick(ByVal inputImagePath As String, ByVal outputPdfPath As String)
    'Dim inputImagePath As String
    'Dim outputPdfPath As String
    Dim command As String
   
    ' Set the paths
    'inputImagePath = "C:\MIHAI\DOC\ASIG\DOSARE\Image.jpg"
    'outputPdfPath = "C:\MIHAI\DOC\ASIG\DOSARE\Output.pdf"
   
    ' Build the command
    command = "C:\Program Files\ImageMagick-7.1.1-Q16-HDRI\magick.exe convert """ & inputImagePath & """ """ & outputPdfPath & """"
   
    ' Execute the command
    Shell command, vbHide
End Sub

---

---

Hi ArnelGP - is it ok how i modified it ?
and where do I have to put this entire code ?
can i make bat file or something ?

Thanks a lot for your help and answer

Put code in Access VBA general module.

Thanks June7
How can i do that ?

This is what I get when I open Access

Attachment 31322

here is a demo.
on the Ribbon->View->Macro->Edit: subTestMagick
when you are in VBA, press F5 to run the code.

Thanks a lot again for your reply.
I think i didnt explain quite well what i try to do. Sorry.
When i run the macro with F5 from Excel it does nothing.... i think i mess something in there

So, i have this folder C:\MIHAI\DOC\ASIG\DOSARE
in this folder will be various jpg and pdf files that i want to convert to 1 single pdf .
Attachment 31331

The output folder i want to be the same folder as the input one.
So I modified your code but I think i did something wrong

Option Explicit


Sub subTestMagick()
Const conType As String = "*.jpg"
Dim col As New Collection
Dim sFile As String, j As Integer
Dim path As String, ext As String

' change the path to the correct path of your jpg's
' right now it will check all jpgs in Document folder.
path = "C:\MIHAI\DOC\ASIG\DOSARE"

sFile = Dir$(path & conType)
Do Until Len(sFile) = 0
j = j + 1
col.Add Item:=sFile, Key:=j & ""
sFile = Dir$
Loop
For j = 1 To col.Count
Call ConvertJpgToPdfUsingMagick(col(j), Replace$(col(j), ".jpg", ".pdf"))
Next
End Sub




Sub ConvertJpgToPdfUsingMagick(ByVal inputImagePath As String, ByVal outputPdfPath As String)
'Dim inputImagePath As String
'Dim outputPdfPath As String
Dim command As String

' Set the paths
inputImagePath = "C:\MIHAI\DOC\ASIG\DOSARE\Image.jpg"
outputPdfPath = "C:\MIHAI\DOC\ASIG\DOSARE\Output.pdf"

' Build the command
command = "C:\Program Files\ImageMagick-7.1.1-Q16-HDRI\magick.exe convert """ & inputImagePath & """ """ & outputPdfPath & """"

' Execute the command
Shell command, vbHide
End Sub

Sorry I am such a newbie at this.
Your help is greatly appreciated.
Thanks.

do not Modify the sub ConvertJpgToPdfUsingMagick.
only modify inPath or outPath on Sub subTestMagick.

Quote:

---

Originally Posted by arnelgp

do not Modify the sub ConvertJpgToPdfUsingMagick.
only modify inPath or outPath on Sub subTestMagick.

---

Thanks a lot ArnelGP for your patience with me. I did it and it worked but only converts the jpg not the pdf. So i have 8 jpgs and 2 pdf files in the folder and it creates a pdf file only with the 8 jpgs files not also with the 2 pdfs.

I used
inPath = "C:\MIHAI\DOC\ASIG\DOSARE\X\*.*"
outPath = "C:\MIHAI\DOC\ASIG\DOSARE\X\Output.pdf"

Thanks a lot again.: pray2:

Hi again!

Is there a way to modify the code so that it deletes all the initial jpgs after the conversion is finished ?

Have a great day!
God Bless !

Below the for loop that calls the convert code. You could check for the existence of the converted PDF file(s), if it's there then delete the image file the PDF was created from:

Code:

---

' delete the images that have been converted to PDFs
For j = 1 To col.Count
    If Dir("C:\MIHAI\DOC\ASIG\DOSARE\X\" & Replace$(col(j), ".jpg", ".pdf")) <> "" Then
        Kill "C:\MIHAI\DOC\ASIG\DOSARE\X\" & col(j)
    End If
Next

---

Quote:

---

Originally Posted by jdelano

Below the for loop that calls the convert code. You could check for the existence of the converted PDF file(s), if it's there then delete the image file the PDF was created from:

Code:

---

' delete the images that have been converted to PDFs
For j = 1 To col.Count
    If Dir("C:\MIHAI\DOC\ASIG\DOSARE\X\" & Replace$(col(j), ".jpg", ".pdf")) <> "" Then
        Kill "C:\MIHAI\DOC\ASIG\DOSARE\X\" & col(j)
    End If
Next

---

---

Hi jdelano and thanks for your reply

i didnt upgraded my correct code, sorry
so I use this code to convert all jpg into 1 single pdf

Code:

---

Option Explicit

Public Sub subTestMagick()
Dim inPath As String
Dim outPath As String
 inPath = "C:\MIHAI\DOC\ASIG\DOSARE\*.*"
outPath = "C:\MIHAI\DOC\ASIG\DOSARE\Outpu.pdf"
Call ConvertJpgToPdfUsingMagick(inPath, outPath)


End Sub


Sub ConvertJpgToPdfUsingMagick(ByVal inputImagePath As String, ByVal outputPdfPath As String)
    Dim command As String
      command = "C:\Program Files\ImageMagick-7.1.1-Q16-HDRI\magick.exe convert -resize 1240x1753 -extent 1240x1753 -gravity center -units PixelsPerInch -density 150x150 """ & inputImagePath & """ """ & outputPdfPath & """"
    Shell command, vbHide
End Sub

---

So, after i run this code with a macro, I need to delete the initial pdf files.
How can I adapt your code to this ?

Thanks,
God Bless!

try this on a sample folder.

Code:

---

Public Sub subTestMagick()Dim inPath As String
Dim outPath As String
Dim Path As String
Dim dictFiles As Object, i As Integer


Set dictFiles = CreateObject("scripting.dictionary")
Path = "C:\MIHAI\DOC\ASIG\DOSARE\"


inPath = Path & "*.*"
outPath = Path & "Output.pdf"


'save all the filename first so we can delete later
Dim sFile As String
sFile = Dir$(inPath)
Do Until Len(sFile) = 0
    dictFiles(Path & sFile) = 1
    sFile = Dir$
Loop
'remove Output.pdf
Select Case dictFiles.Count
Case Is > 1
    If dictFiles.Exists(outPath) Then
        'delete only if there are other files
        dictFiles.Remove outPath
        Kill outPath
    End If
Case Is = 1
    If dictFiles.Exists(outPath) Then
        Exit Sub
    End If
Case Is = 0
    Exit Sub
End Select
'convert to pdf
Call ConvertJpgToPdfUsingMagick(inPath, outPath)


'delete the initial files
For i = 0 To dicFiles.Count - 1
    Kill dictFiles.Keys()(i)
Next
End Sub




Sub ConvertJpgToPdfUsingMagick(ByVal inputImagePath As String, ByVal outputPdfPath As String)
    Dim command As String
      command = "C:\Program Files\ImageMagick-7.1.1-Q16-HDRI\magick.exe convert -resize 1240x1753 -extent 1240x1753 -gravity center -units PixelsPerInch -density 150x150 """ & inputImagePath & """ """ & outputPdfPath & """"
    Shell command, vbHide
End Sub

---

Hi ArnelGP

Thanks again for taking your time with me...

Its really curious what is happening here

So, if i use it like this it creates the pdf file from jpgs and then deletes all the files including the resulting pdf file:

Code:

---

'delete the initial files
For i = 0 To dictFiles.Count - 1
  Kill dictFiles.Keys()(i)
Next

---

If i replace -1 with -2 it keeps the resulting pdf file (output.pdf ) and keeps 1 jpg file ( the last jpg file ).
For example if i have 1.jgp, 2.jpg, 3.jpg, 4.jpg it creates the file Output.pdf and keeps 4.jpg ( the last jpg file ).

Code:

---

'delete the initial files
For i = 0 To dictFiles.Count - 2
  Kill dictFiles.Keys()(i)
Next

---