Check for end of sentence and add a full stop if missing

Hi,

I check a lot of large documents and it is amazing how many people still don't put full stops at the end of a sentence.

I want to make a macro which will search a document for the end of a paragraph, see if there is a valid end of sentence character e.g. full stop, question mark etc and if not, automatically insert a full stop.

Any ideas where to start?

Thanks in advance for any help....

Quote:

---

I check a lot of large documents and it is amazing how many people still don't put full stops at the end of a sentence.

---

Are you saying these large documents are ONE paragraph, in that by full stop you mean a paragraph mark? They are using a Shift-Enter to make a new line (but the same paragraph)?

If so, then by definition you can not have a maco searching for "the end of a paragraph", because without a "full stop" (paragraph mark), there is no end of the paragraph.

Please clarify.

Have you tried recording such a macro? To replace line breaks, with paragraph marks, it wouldf be something like:[vba] Selection.Find.ClearFormatting
Selection.Find.Replacement.ClearFormatting
With Selection.Find
.Text = "^l"
.Replacement.Text = "^p"
.Forward = True
.Wrap = wdFindContinue

End With
Selection.Find.Execute Replace:=wdReplaceAll[/vba]

It is also amazing that Word routinely mistakes abbreviations for sentence stops. See: http://gregmaxey.mvps.org/word_tip_p...sentences.html

Try:

Code:

---

Sub Demo()
Dim Para As Paragraph
For Each Para In ActiveDocument.Paragraphs
  If Len(Para.Range.Text) > 1 Then
    If Not Para.Range.Characters.Last.Previous Like "[.!?:;]" Then
      Para.Range.Characters.Last.InsertBefore "."
    End If
  End If
Next
End Sub

---

Macropod - you are brilliant. So simple, but so far seems to do the job perfectly. Thank you very much :)

gmaxey - cheers for the link. I had a quick look, but I will need to spend some time looking at it properly later on :)

fumei - Thanks for your reponse. They are large documents with multiple paragraphs.

OK, I am going to be really cheeky now :)

Whilst the code does work on simple text in a document, it also adds a full stop to headings, graphics etc. It also appears to be erroring when it hits the end of the first line of a table with a

"Run-time error '5251':
This is not a valid action for the end of a row."

Is there anyway we can adjust the code above so that it will only apply to text in the "Normal" style? I thought this might be the easiest way to eliminate headings, graphics etc.... Or can anyone think of a better idea?

On the assumption that your in-line graphics are the only things in their paragraphs, you could try something along the lines of:

Code:

---

Sub Demo()
    Dim Para As Paragraph
    For Each Para In ActiveDocument.Paragraphs
  If Len(Para.Range.Text) > 2 And Left(Para.Range.Style.NameLocal, 7) <> "Heading" Then
    If Not Para.Range.Characters.Last.Previous Like "[.!?:;]" Then
      Para.Range.Characters.Last.InsertBefore "."
    End If
  End If
    Next
End Sub

---

The above takes care of the table issue too.

Thanks again :)

I have tweaked it a bit to include a few other styles that we would want excluded, so that is great and really helpful.

Is there anyway that we can exclude tables altogether from the code? At the moment it is putting a full stop in all of the table headings, every column (when usually we don't want them) etc.

You could use a test like:
If Len(.Text) > 2 And .Information(wdWithInTable) = False And Left(.Style.NameLocal, 7) <> "Heading" Then

This is all brilliant. I seem to have 1 final problem. I keep getting a

"Run-time error '91':
Object variable or With block variable not set"

when I run it. I think it is failing on the Table of Contents. I have tried to exclude the TOC style, but it doesn't seem to make a difference.

At the moment, the code is running on the ActiveDocument. Is there any way I can change it so that it either starts on a certain page e.g. 6 onwards or starts in the second section onwards?

As a side note, some of my users have been creating headings in normal text and then making them look like the headings style (people just don't get styles). This code puts a full stop after these, so it is easy to see which headings contain errors.....great little spin off effect :)

There seems to be a measure of scope creep going on here. Try the following. I've added some efficiency enhancements:

Code:

---

Sub Demo()
Application.ScreenUpdating = False
Dim Para As Paragraph
On Error Resume Next
For Each Para In ActiveDocument.Paragraphs
  With Para.Range
    If .Characters.Last.Previous.InRange(ActiveDocument.TablesOfContents(1).Range) = False Then
      If Left(.Style.NameLocal, 7) <> "Heading" Then
        If Len(.Text) > 2 Then
          If Not .Characters.Last.Previous Like "[.!?:;]" Then
            .Characters.Last.InsertBefore "."
          End If
        End If
      End If
    End If
  End With
Next
Application.ScreenUpdating = True
End Sub

---

It all works great! I just added the table check and it does the job. I very much appreciate your help and time on this. Thank you.

Hi Dr Howells, I'm trying to achieve what you have here but am unfamiliar with VBA, would you be able to post your solution here? Fundamentally I too need to scan a document and add a fullstop at the end of a paragraph of text without affecting another part of the document nor any other stsyele - in fact the paragraphs are all in a special style, "StandardCo" I'd created. If anyone else can advise, please do, there's a lot of knowledgable experts here.
Thanks
James

The 'Dr Howells' solution is in post 11. Try:

Code:

---

Sub Demo1()
Application.ScreenUpdating = False
Dim i As Long
With ActiveDocument.Range
  With .Find
    .ClearFormatting
    .Replacement.ClearFormatting
    .Text = "^p"
    .Style = "StandardCo"
    .Replacement.Text = ""
    .Forward = True
    .Wrap = wdFindStop
    .Format = True
    .MatchWildcards = False
    .Execute
  End With
  Do While .Find.Found
    If Len(Trim(.Duplicate.Paragraphs(1).Range.Text)) > 1 Then
      If Not .Characters.Last.Previous Like "[.!?:;]" Then
        .Characters.Last.InsertBefore "."
        i = i + 1
      End If
    End If
    If .Duplicate.End = ActiveDocument.Range.End Then Exit Do
    .Collapse wdCollapseEnd
    .Find.Execute
  Loop
End With
Application.ScreenUpdating = True
MsgBox i & " instances found & updated."
End Sub

---

or:

Code:

---

Sub Demo2()
    Application.ScreenUpdating = False
    Dim Para As Paragraph, i As Long
    On Error Resume Next
    For Each Para In ActiveDocument.Paragraphs
        With Para.Range
            If .Style.NameLocal = "StandardCo" Then
                If Len(Trim(.Text)) > 2 Then
                    If Not .Characters.Last.Previous Like "[.!?:;]" Then
                        i = i + 1
                        .Characters.Last.InsertBefore "."
                    End If
                End If
            End If
        End With
    Next
    Application.ScreenUpdating = True
    MsgBox i & " instances found & updated."
End Sub

---

The first one will be faster, but won't get content terminated by table end-of-cell markers.

Hi !
I'm glad to have found this code (Demo2) !!!
I adapted it to do the job for several styles in the document.
But now, I'd like the user be asked (VbYesNOCancel) if he wants the full stop or not for each location where there is none and I tried many many things without any result :banghead:
I'm just a coder monkey...
If someone can help me, it would be great !!!

Code:

---

Sub Demo2()
Dim oPar As Paragraph, lngInst As Long, lngUpdate As Long
On Error Resume Next
  For Each oPar In ActiveDocument.Paragraphs
    With oPar.Range
      If .Style.NameLocal = "Normal" Then
        If Len(Trim(.Text)) > 2 Then
          If Not .Characters.Last.Previous Like "[.!?:;]" Then
            .Characters.Last.Previous.Select
            lngInst = lngInst + 1
            Select Case MsgBox("Do you want a period here?", vbYesNoCancel, "Add Stop")
              Case vbYes
                .Characters.Last.InsertBefore "."
                lngUpdate = lngUpdate + 1
              Case vbNo
              Case Else: Exit For
            End Select
          End If
        End If
      End If
    End With
  Next
  MsgBox lngInst & " instances found " & lngUpdate & " instances updated."
End Sub

---

Thanks Greg !
I'm silly, I didn't try" Select case MsgBox"... only tried "If MsgBox"...
I'll closely compare the 2 versions of Demo2 and for sure I'll learn new things ! :yes
Thanks again for sharing your knowledge !!!!

Bernard

I know this is a very old thread, but I have found it extremely helpful and so didn't want to start a new thread.

I just wondered, for the code in Demo2 - is there a way to start it from a specific page onwards. I would like to achieve exactly what it achieves, but only from page 8 onwards and ignore pages 1-7 completely.

If you can physically put the cursor at the top of page 8 then Demo3 should work. Otherwise, use Demo4

Code:

---

Sub Demo3()
Dim oRng As Range
Dim oPar As Paragraph, lngInst As Long, lngUpdate As Long
On Error Resume Next
  Set oRng = ActiveDocument.Range
  oRng.Start = Selection.Range.Start
  For Each oPar In oRng.Paragraphs
    With oPar.Range
      If .Style.NameLocal = "Normal" Then
        If Len(Trim(.Text)) > 2 Then
          If Not .Characters.Last.Previous Like "[.!?:;]" Then
            .Characters.Last.Previous.Select
            lngInst = lngInst + 1
            Select Case MsgBox("Do you want a period here?", vbYesNoCancel, "Add Stop")
              Case vbYes
                .Characters.Last.InsertBefore "."
                lngUpdate = lngUpdate + 1
              Case vbNo
              Case Else: Exit For
            End Select
          End If
        End If
      End If
    End With
  Next
  MsgBox lngInst & " instances found " & lngUpdate & " instances updated."
End Sub
Sub Demo4()
Dim oRng As Range
Dim oPar As Paragraph, lngInst As Long, lngUpdate As Long
On Error Resume Next
  Set oRng = ActiveDocument.Range
  oRng.Collapse wdCollapseStart
  Do Until oRng.Paragraphs(1).Range.Characters.Last.Information(wdActiveEndPageNumber) = 8
    oRng.Move wdParagraph, 1
  Loop
  oRng.Select
  oRng.End = ActiveDocument.Range.End
  For Each oPar In oRng.Paragraphs
    With oPar.Range
      If .Style.NameLocal = "Normal" Then
        If Len(Trim(.Text)) > 2 Then
          If Not .Characters.Last.Previous Like "[.!?:;]" Then
            .Characters.Last.Previous.Select
            lngInst = lngInst + 1
            Select Case MsgBox("Do you want a period here?", vbYesNoCancel, "Add Stop")
              Case vbYes
                .Characters.Last.InsertBefore "."
                lngUpdate = lngUpdate + 1
              Case vbNo
              Case Else: Exit For
            End Select
          End If
        End If
      End If
    End With
  Next
  MsgBox lngInst & " instances found " & lngUpdate & " instances updated."
End Sub

---

How would you represent a long dash in that list of excluded characters?

I've tried everything I can think of: copying a long dash into the sequence, adding a forward slash in front of it, putting in character codes Chr(151), ChrW(&H2014). But the macro still finds every paragraph that legitimately ends in a long dash. Even concatenating it as follows:

If Not .Characters.Last.Previous Like "[0123456789'….,!?:*;"")" & "ChrW(&H2014)]"

Stumped!