Move Lotus Notes mail to a folder in Lotus Notes through VBA

[WhySoSerious]

Hello Everyone

I am a new member to this forum.

I searched for my query in this forum but not able to find the answer. Please forgive me if these kind of questions were already answered in past.

I got a task where I have to to create VBA which will detach attachments from LN inbox mails, delete the attachment, move those mails to a Lotus Notes folder and finally send automatic reply mail to sender.

I am able to detach attachments from mail but not able to move mail documents from Inbox to "Cleared" folder in LN.

This is what I have used :
..................
If (attch.Type = EMBED_ATTACHMENT) Then
attch.ExtractFile sPathToSave & attch.Name 'save attachment to directory
attch.remove 'delete attachment from mail
End If
doc.PutInFolder "Cleared", True 'copy mail to Cleared Folder in LN
doc.Removefromfolder "($Inbox)", True 'delete mail from inbox
........................

This code makes copy of first mail in 'Processed' folder of LN but never delete mail from Inbox. In fact, it create two copies which are seemed to be linked. That means if I delete mails from inbox (after code run) mails also get deleted from 'Processed' folder. Moreover, due to this issue the loop is running on the first mail only.

Can someone please help me and guide me on this.
Thanks.

[shrivallabha]

Welcome to VBAX. I suppose (for what you are looking for) you will not require Excel VBA but creating agent in LN. You will find some useful links by googling and LN / IBM normally post the name of Application Support Engineer to whom you can contact.
http://www.nsftools.com/tips/NotesTips.htm

[WhySoSerious]

Thanks for reply Shrivallabha.

yes, this is possible through Lotusscript but we are not allowed to access Domino Designer, thats the reason I am trying to do this from Excel VBA.
Any advice on this please.

[shrivallabha]

I have faced some difficulties in achieving desired results. It was one-off assignment so I may not prove to be the right person to get help from. However, there are a few things that may provide you some good leads:
http://www.vbaexpress.com/forum/show...ht=Lotus+Notes

Also, in VBE select the Lotus Notes references option using Tools>>References so that you can see the available objects using Object Browser.

I might be of little help but you may post back your requirements. Lets see if we can take it from there. All the best!

[Kenneth Hobs]

Shrivallabha has provided some good direction. I would think that you would want to try some things used in: http://www.rondebruin.nl/notes1.htm

I would recommend that you use early binding methods as previously recommended. This makes it easier to program but makes no significant difference otherwise. The method at Ron's site uses late binding. I commented on how to do the early binding in: http://www.vbaexpress.com/forum/showthread.php?t=16109

To get more help here, I suggest that you post the full code so that we can test.

[Crocus Crow]

Try:

doc.Save True, False

before the PutInFolder, to commit changes to the document.

[WhySoSerious]

Thanks a ton to all of you.

Shrivallabha: LN reference is already made in VBA. If possible, please take a look at complete code below.

Crocus Crow: I tried your suggested code this but still facing the same problem.

Kenneth Hobs: I checked those links, not able to find code where we can move or delete inbox mails. May be I am doing something wrong here....I don't have much experience in VBA and this is the first time I am trying to connect LN with VBA.

Please see the complete code below and please advice.

*******************************************
Global Const sPathToSave As String = "C:\MailDocs\" ''''''''''path to save mail files
Global Const RICHTEXT As Long = 1
Global Const EMBED_ATTACHMENT As Long = 1454 '''''''1454 indicate a file attachment
''''''server and mail db path
Global Const sServerName = "servername"
Global Const sUserDB = "mailnsf"
Public NSession As Object 'The notes session
Public Db As Object 'The notes mail database
Public MailDoc As Object
Public Body As Object
Global sSendTo As String
Global sSubject As String
Global SAttchName As String
Global Const sBodyText As String = "Thank you for your mail."

Public Sub mail()
Dim View As Object
Dim Doc As Object
Dim NxtDoc As Object
Dim itm As Variant
Dim attch As Variant

''''''''Create Notes Session
Set NSession = CreateObject("Notes.Notessession")
''''''''Initiate Notes database and get Connection to Mail File
Set Db = NSession.GetDatabase(sServerName, sUserDB)
'''''''''Open mailbox if not already open
''''If db.IsOpen = False Then Call Db.Openmail
'''''''''Folers are viwes in LN, get Inbox view
Set View = Db.GetView("($Inbox)")
'''''Get to first mail in inbox view
Set Doc = View.GetFirstDocument

''''Iterate through all the emails in the inbox
While Not Doc Is Nothing
''''''A pointer to the next document in the view is established
Set NxtDoc = View.GetNextDocument(Doc)
''''''''Check if the current document has an attachment or not.
If Doc.HasEmbedded Then
Set itm = Doc.GetFirstItem("Body")
If itm.Type = RICHTEXT Then
''''''get all attachments
For Each attch In itm.EmbeddedObjects
If (attch.Type = EMBED_ATTACHMENT) Then
'''''get recipients mail id
sSendTo = Doc.GetItemValue("From")(0)
'''''get attachment name
SAttchName = attch.Name
'''''get subject line
sSubject = Doc.GetItemValue("Subject")(0)
'''''Save the attached file into the folder.
attch.ExtractFile sPathToSave & attch.Name
'''''Remove attachment from the mail
attch.Remove
End If
Next
Doc.Save True, False
Doc.PutInFolder "Cleared", True
''''''Delete mail document from Inbox
'Doc.Remove (True) '''-->not using since delete from both Inbox & Cleared folder
Doc.Removefromfolder "($Inbox)", True
'''''====>>>> this is where the real problem exists it never delete mail from inbox, infact make copy in Cleared Folder and create kind of link to Inbox mail and Cleared Folder mail that means if delete mail from any of these folder it get created from both..
End If
End If

''''''''calling reply mail
Set MailDoc = Db.CreateDocument
MailDoc.Form = "Memo"
MailDoc.sendto = sSendTo
MailDoc.Subject = "Re: " & sSubject & " - " & SAttchName
MailDoc.Body = sBodyText
MailDoc.SaveMessageOnSend = True
' '''''''''''Saving message
MailDoc.PostedDate = Now()
'MailDoc.Send 0, sSendTo
MailDoc.Send False

''''Refresh Inbox ===>>> i guess none of these working...i am trying to refresh mailbox by this.
Call View.Refresh
Call NSession.UpdateProcessedDoc(Doc)

''''Set current document pointer
Set Doc = NxtDoc

Wend

'''''release all memory
Set MailDoc = Nothing
Set Body = Nothing
Set NxtDoc = Nothing
Set Doc = Nothing
Set View = Nothing
Set Db = Nothing
Set NSession = Nothing
End Sub
****************************************************

[Crocus Crow]

Your code did the same for me: it saved and removed any attachments, copied the mail document to the specified folder, but also kept it in the Inbox.

Try using the Lotus Domino Objects (COM classes) instead of OLE objects. To do this, change:

Set NSession = CreateObject("Notes.Notessession")

to:

Set NSession = CreateObject("Lotus.NotesSession")

You might need other changes to go with this change.

Also, please post your code within [ code ] tags to preserve the indentation (I assume you have indented it properly in the VB editor) and make it easier to see the overall structure.

Correction: Please enclose your code within [vba] tags as this correctly indents the code. Other forums use [Code] but here at VBAEXPRESS we prefer the [vba] tags instead. You can simply select your code and click on the green VBA button to wrap code or simply click the green VBA button and insert your code within the tags

[shrivallabha]

Your code did the same for me: it saved and removed any attachments, copied the mail document to the specified folder, but also kept it in the Inbox.

Try using the Lotus Domino Objects (COM classes) instead of OLE objects. To do this, change:

Set NSession = CreateObject("Notes.Notessession")

to:

Set NSession = CreateObject("Lotus.NotesSession")

You might need other changes to go with this change.

Also, please post your code within [ code ] tags to preserve the indentation (I assume you have indented it properly in the VB editor) and make it easier to see the overall structure.

Have you tried your hand with COM objects as you have specified? In the object explorer I had found that Notesession is also a member of Domino but CreateObject method failed to create Domino.Notessession. I must admit that I didn't try Lotus.Notessession.

@whysoserious: I can give you a feedback by Monday (soonest if I get time that is) when I get a chance to look at LN which is available in office.

[Kenneth Hobs]

I won't be in the office until Friday next week. I had similar problems. This does copy the attachments though. If you comment and uncomment the objects for early and late binding, you can use intellisense to explore some methods and properties.

[VBA]Sub Test_Save_RemoveAttachments()
Save_Remove_Attachments "mail\khobson.nsf", "C:\MyFiles\Lotus\Notes\Attachments\", "Processed"
End Sub

'Similar to: 'http://www.rondebruin.nl/notes1.htm
Sub Save_Remove_Attachments(theNSF As String, stPath As String, lnPutInFolder As String)
'Late Bind
Dim noSession As Object
Dim noDatabase As Object
Dim noDocument As Object
Dim noNextDocument As Object
Dim noView As Object

'Early Bind - Tools > Reference > Lotus Notes Automation Classes, notes32.tlb
' Dim noSession As lotus.NOTESSESSION
' Set noSession = CreateObject("Notes.NotesSession")
' Dim noDatabase As lotus.NOTESDATABASE
' Set noDatabase = noSession.GETDATABASE("", "mail\username.nsf")
' Dim noDocument As lotus.NOTESDOCUMENT
' Dim noNextDocument As lotus.NOTESDOCUMENT
' Set noNextDocument = noDatabase.CREATEDOCUMENT
' Dim noView As lotus.NOTESVIEW

Dim EMBED_ATTACHMENT As Long
Dim RICHTEXT As Long

'Embedded objects are of the datatype Variant.
Dim vaItem As Variant
Dim vaAttachment As Variant

EMBED_ATTACHMENT = 1454
RICHTEXT = 1

'Exit if storage path for attachments, stPath, does not exist.
If Right(stPath, 1) <> "\" Then stPath = stPath & "\"
If Dir(stPath, vbDirectory) = "" Then
MsgBox stPath & vbLf & "Macro is ending!", vbCritical, "Storage Path Does Not Exist!"
Exit Sub
End If

'Instantiate the Notes session.
Set noSession = CreateObject("Notes.NotesSession")

'Instantiate the actual Notes database.
'(Here is the personal e-mail database used and since it's a
'local database no reference is made to any server.)
Set noDatabase = noSession.GETDATABASE("", theNSF)
If noDatabase.IsOpen = False Then
noDatabase.OPENMAIL
End If

'Folders are views in Lotus Notes and in this example the Inbox is used.
Set noView = noDatabase.GetView("($Inbox)")

On Error GoTo err_h
'Get the first document in the defined view.
Set noDocument = noView.GetFirstDocument

'Iterate through all the e-mails in the view Inbox.
Do Until noDocument Is Nothing

'Although the following approach is not necessary for this
'kind of operations it may be a good approach to use in general.
Set noNextDocument = noView.GetNextDocument(noDocument)

'Check if the document has an attachment or not.
If noDocument.HasEmbedded Then
Set vaItem = noDocument.GetFirstItem("Body")
If vaItem.Type = RICHTEXT Then
For Each vaAttachment In vaItem.EmbeddedObjects
If vaAttachment.Type = EMBED_ATTACHMENT Then
'Save the attached file into the new folder and remove it from the e-mail.
With vaAttachment
.ExtractFile stPath & vaAttachment.Name
.Remove
End With
'Save the e-mail in order to reflect the deleting of the attached file.
'(A more sophisticated approach may be considered if several e-mails have
'several attachments in order to avoid a repeately saving of one e-mail.)
noDocument.Save True, False, True
noDocument.PUTINFOLDER lnPutInFolder, True
noDocument.REMOVEFROMFOLDER "($Inbox)", True
End If
Next vaAttachment
End If
End If
Set noDocument = noNextDocument
Loop

'Release objects from memory.
Set noNextDocument = Nothing
Set noDocument = Nothing
Set noView = Nothing
Set noDatabase = Nothing
Set noSession = Nothing

MsgBox "All the attachments in the Inbox have successfully been saved and removed." _
, vbInformation

'Clean Up
err_h:
Set noSession = Nothing
Set noDatabase = Nothing
Set noDocument = Nothing
Set noNextDocument = Nothing
Set noView = Nothing
End Sub

[/VBA]

[WhySoSerious]

Have you tried your hand with COM objects as you have specified? In the object explorer I had found that Notesession is also a member of Domino but CreateObject method failed to create Domino.Notessession. I must admit that I didn't try Lotus.Notessession.

@whysoserious: I can give you a feedback by Monday (soonest if I get time that is) when I get a chance to look at LN which is available in office.

ok, Thanks. In the meantime, I will try code provided by KennethHobs.

[WhySoSerious]

Your code did the same for me: it saved and removed any attachments, copied the mail document to the specified folder, but also kept it in the Inbox.

Try using the Lotus Domino Objects (COM classes) instead of OLE objects. To do this, change:

Set NSession = CreateObject("Notes.Notessession")

to:

Set NSession = CreateObject("Lotus.NotesSession")

You might need other changes to go with this change.

Also, please post your code within [ code ] tags to preserve the indentation (I assume you have indented it properly in the VB editor) and make it easier to see the overall structure.

Correction: Please enclose your code within [vba] tags as this correctly indents the code. Other forums use [code] but here at VBAEXPRESS we prefer the [vba] tags instead. You can simply select your code and click on the green VBA button to wrap code or simply click the green VBA button and insert your code within the tags

Tried COM Classes, its still not working. Yes, I have indented vba code properly in VBA editor, it was just copy-paste here.....i was too blind that didnt notice that there is a VBA Tags option in this forum. Thanks for showing me the right direction.

[WhySoSerious]

I won't be in the office until Friday next week. I had similar problems. This does copy the attachments though. If you comment and uncomment the objects for early and late binding, you can use intellisense to explore some methods and properties.

[vba]Sub Test_Save_RemoveAttachments()
Save_Remove_Attachments "mail\khobson.nsf", "C:\MyFiles\Lotus\Notes\Attachments\", "Processed"
End Sub

'Similar to: 'http://www.rondebruin.nl/notes1.htm
Sub Save_Remove_Attachments(theNSF As String, stPath As String, lnPutInFolder As String)
'Late Bind
Dim noSession As Object
Dim noDatabase As Object
Dim noDocument As Object
Dim noNextDocument As Object
Dim noView As Object

'Early Bind - Tools > Reference > Lotus Notes Automation Classes, notes32.tlb
' Dim noSession As lotus.NOTESSESSION
' Set noSession = CreateObject("Notes.NotesSession")
' Dim noDatabase As lotus.NOTESDATABASE
' Set noDatabase = noSession.GETDATABASE("", "mail\username.nsf")
' Dim noDocument As lotus.NOTESDOCUMENT
' Dim noNextDocument As lotus.NOTESDOCUMENT
' Set noNextDocument = noDatabase.CREATEDOCUMENT
' Dim noView As lotus.NOTESVIEW

Dim EMBED_ATTACHMENT As Long
Dim RICHTEXT As Long

'Embedded objects are of the datatype Variant.
Dim vaItem As Variant
Dim vaAttachment As Variant

EMBED_ATTACHMENT = 1454
RICHTEXT = 1

'Exit if storage path for attachments, stPath, does not exist.
If Right(stPath, 1) <> "\" Then stPath = stPath & "\"
If Dir(stPath, vbDirectory) = "" Then
MsgBox stPath & vbLf & "Macro is ending!", vbCritical, "Storage Path Does Not Exist!"
Exit Sub
End If

'Instantiate the Notes session.
Set noSession = CreateObject("Notes.NotesSession")

'Instantiate the actual Notes database.
'(Here is the personal e-mail database used and since it's a
'local database no reference is made to any server.)
Set noDatabase = noSession.GETDATABASE("", theNSF)
If noDatabase.IsOpen = False Then
noDatabase.OPENMAIL
End If

'Folders are views in Lotus Notes and in this example the Inbox is used.
Set noView = noDatabase.GetView("($Inbox)")

On Error GoTo err_h
'Get the first document in the defined view.
Set noDocument = noView.GetFirstDocument

'Iterate through all the e-mails in the view Inbox.
Do Until noDocument Is Nothing

'Although the following approach is not necessary for this
'kind of operations it may be a good approach to use in general.
Set noNextDocument = noView.GetNextDocument(noDocument)

'Check if the document has an attachment or not.
If noDocument.HasEmbedded Then
Set vaItem = noDocument.GetFirstItem("Body")
If vaItem.Type = RICHTEXT Then
For Each vaAttachment In vaItem.EmbeddedObjects
If vaAttachment.Type = EMBED_ATTACHMENT Then
'Save the attached file into the new folder and remove it from the e-mail.
With vaAttachment
.ExtractFile stPath & vaAttachment.Name
.Remove
End With
'Save the e-mail in order to reflect the deleting of the attached file.
'(A more sophisticated approach may be considered if several e-mails have
'several attachments in order to avoid a repeately saving of one e-mail.)
noDocument.Save True, False, True
noDocument.PUTINFOLDER lnPutInFolder, True
noDocument.REMOVEFROMFOLDER "($Inbox)", True
End If
Next vaAttachment
End If
End If
Set noDocument = noNextDocument
Loop

'Release objects from memory.
Set noNextDocument = Nothing
Set noDocument = Nothing
Set noView = Nothing
Set noDatabase = Nothing
Set noSession = Nothing

MsgBox "All the attachments in the Inbox have successfully been saved and removed." _
, vbInformation

'Clean Up
err_h:
Set noSession = Nothing
Set noDatabase = Nothing
Set noDocument = Nothing
Set noNextDocument = Nothing
Set noView = Nothing
End Sub

[/vba]

Thanks Kenneth.

I tried this code but facing the same problem...it successfully detach attachment, delete attachment, create copy of mail in 'Processed' LN folder but never delete original mail from inbox. Again it create linked mails (copy mail of 'Processed' folder and original mail of inbox are linked, you delete from one place they get deleted from both place).
I thought it could be some refresh problem but thats also not the problem. Now this is making me crazy....

[WhySoSerious]

Hi Shrivallabha,

I am still stuck with this ....any suggestion please.

[Crocus Crow]

Try this. It works for me on Notes 6.5.5. As I suggested, it uses the Domino COM class NotesSession to establish a Notes session:

Set NSession = CreateObject("Lotus.NotesSession")
[vba]Private Const RICHTEXT As Long = 1
Private Const EMBED_ATTACHMENT As Long = 1454


Public Sub Save_and_Remove_File_Attachments_Move_Folder()

Dim NUIWorkspace As Object
Dim NSession As Object
Dim NMailDb As Object
Dim NMoveDocsCollection As Object
Dim NView As Object
Dim NDoc As Object, NNextDoc As Object
Dim NItem As Variant
Dim NAttachment As Variant
Dim NMailDoc As Object
Dim sSendTo As String
Dim sSubject As String
Dim sAttachmentNames As String
Dim sSaveWindowsFolder As String
Dim sUserDB As String, sServerName As String, sNotesSourceFolder As String, sNotesDestinationFolder
Dim sBodyText As String

sNotesSourceFolder = "$Inbox"
sNotesDestinationFolder = "Processed"
sSaveWindowsFolder = "C:\MailDocs\"
sServerName = "" 'local Notes server - change as required
sUserDB = "mailnsf"

sBodyText = "Thank you for your mail."

'Front end UI is only exposed with OLE automation

Set NUIWorkspace = CreateObject("Notes.NotesUIWorkspace")

'Start a Notes session, using Lotus Domino Objects (COM classes)

Set NSession = CreateObject("Lotus.NotesSession") 'COM, late binding
NSession.Initialize "" 'supported in COM only

Set NMailDb = NSession.GETDATABASE(sServerName, sUserDB)
If Not NMailDb.IsOpen Then NMailDb.Open

'Create an empty collection which will contain the documents to be moved from the Notes source folder to the destination folder
'This is a kludge because Notes can't do: Set docCollection = New NotesDocumentCollection

Set NMoveDocsCollection = NMailDb.Search("", Nothing, 0)

'Loop through all documents in source folder

Set NView = NMailDb.GetView(sNotesSourceFolder)
Set NDoc = NView.GetFirstDocument
Do Until NDoc Is Nothing

'Cache next document in case the view changes outside this procedure

Set NNextDoc = NView.GetNextDocument(NDoc)

'Has current document got an attachment?

If NDoc.HasEmbedded Then
Set NItem = NDoc.GetFirstItem("Body")
If NItem.Type = RICHTEXT Then

sSendTo = NDoc.GetItemValue("From")(0)
sSubject = NDoc.GetItemValue("Subject")(0)

Debug.Print "Move: " & sSubject

'Save and remove each attachment

sAttachmentNames = ""
For Each NAttachment In NItem.EmbeddedObjects
If NAttachment.Type = EMBED_ATTACHMENT Then
sAttachmentNames = sAttachmentNames & NAttachment.Name & ", "
ExtractNotesAttachment NAttachment, sSaveWindowsFolder
NAttachment.Remove
End If
Next

'Save the modified document and add it to the collection of documents to be moved

NDoc.Save True, False
NMoveDocsCollection.AddDocument NDoc

'Create and send email to sender

Set NMailDoc = NMailDb.CreateDocument
With NMailDoc
.ReplaceItemValue "Form", "Memo"
.ReplaceItemValue "Subject", "Re: " & sSubject & " - " & Left(sAttachmentNames, Len(sAttachmentNames) - 2)
.ReplaceItemValue "SendTo", sSendTo
.ReplaceItemValue "Body", sBodyText

'The Principal and From fields are required, otherwise the From email address is empty in the received email.
'Note that the @MyNotesDomain string must be present in the Principal field

.ReplaceItemValue "Principal", "Your Name<your.email_address@email.com@YourNotesDomain>" 'CHANGE AS REQUIRED
.ReplaceItemValue "From", "Your Name<your.email_address@email.com>" 'CHANGE AS REQUIRED

.SaveMessageOnSend = True
.Send False
End With

End If
End If

Set NDoc = NNextDoc

Loop

'Move documents from Notes source folder to destination folder

With NMoveDocsCollection
.PutAllInFolder sNotesDestinationFolder, True
.RemoveAllFromFolder sNotesSourceFolder
End With

'Refresh source folder

NUIWorkspace.VIEWREFRESH

Set NMailDoc = Nothing
Set NNextDoc = Nothing
Set NDoc = Nothing
Set NMoveDocsCollection = Nothing
Set NView = Nothing
Set NMailDb = Nothing
Set NSession = Nothing
Set NUIWorkspace = Nothing

End Sub

Private Sub ExtractNotesAttachment(NotesAttachment As Variant, WindowsFolder As String)

'Extract a Notes file attachment to a Windows folder path

'The ExtractFile method can cause the following error:
' Notes error: File is in use by another program

'Therefore we isolate this method in this procedure to handle this possible error by waiting
'and trying again until successful

On Error Resume Next
Do
Err.Clear
NotesAttachment.ExtractFile WindowsFolder & NotesAttachment.Name

If Err.Number <> 0 Then
'Debugging info only
Debug.Print "Err.Number = " & Err.Number
Debug.Print "Err.Description = " & Err.Description
Debug.Print "Err.LastDllError = " & Err.LastDllError
End If

If Err.Number <> 0 Then Application.Wait Now + TimeValue("00:00:00.20")
Loop Until Err.Number = 0
On Error GoTo 0

End Sub
[/vba]A word or two on some of the techniques used.

I found that moving documents one by one caused documents to be skipped. Therefore instead of moving each document in the loop, it adds them to a collection which is moved as a whole outside the loop.

Another 'gotcha' is that sometimes the ExtractFile method can cause the following error:

Notes error: File is in use by another program.

This potential error is handled by calling ExtractFile in a separate procedure which contains an On Error handler which waits and tries again until the file is successfully extracted. This error probably occurred in my testing because all my test documents (emails) have the same file attachments and it's possible that the Windows disk i/o was still busy saving the file for the previous Notes document file when it tried to save the same file for the next Notes document.

[WhySoSerious]

Crocus Crow Thank a million

Thanks to Kenneth and Shrivallabha for all their help.

I have been looking for answer everywhere and finallllllly.......

I love this forum.

[duncanphilps]

(I know this issue was answered a year back, but this is background info on Lotus Notes behaviour)

I found this thread while looking for info on Lotus Notes' object model for a bit of access from VBA and scripting tools. I've used Notes for ages

The way Notes uses folders means that a document (email etc) can be in more than one folder. It's not like a disk file being in only one folder by definition, it's more like tagging a message in a blog or on twitter, where several tags can be relevant. Think cross-references and you start to get the idea.

So simply putting a document into a folder doesn't move it out of where it is. And the Inbox is a folder in Notes's terms. Equally, deleting a document that's in the Inbox does what it says on the tin: it deletes the document from the database, so it disappears from both Inbox and wherever else it is (""Cleared" in this example).

What you have to do is put the document into your target folder and then use "remove from folder" to stop it appearing in the Inbox. In the Notes user interface, there is a "move to folder" option which does indeed do both operations in one click - but I don't know whether that is available from VBA. I suspect it isn't in order to give programmer control and because it would only be one extra statement to code.

Hope that's interesting & useful. Now back to my problem...

[shrivallabha]

Hi duncanphilips,

Thanks for sharing LN related info. That said, you haven't specified what are you setting out to do?

If you are looking for good reference regarding Lotus objects then try IBM Redbook. And listen to what crocus_crow has suggested above. I have tried to summarize my experience here.

Apart from this, if you want to work out some mail sending routines then see Ron De Bruin's site which has good reference material in this regard.

If your requirement is different than WhySoSerious' then it will be wise to start a new thread. Good Luck.